Setting up Clinipad on a device that has previously been added to EXACT requires different steps to setting up a new device. 

Configure a Previously Setup Clinipad

1. In EXACT, go to Administration - Clinipad.
   • Or click on the Clinipad option in your workspace along the top of EXACT.
2. Click the spanner in the lower right of the screen
3. This will open your Clinipad configuration.
4. Locate the device you wish to reconfigure.
   • Click the bin icon on this device; this will remove it from your screen.
5. You will now need to clear the previously stored data from the tablet.
   • The steps for both Android tablets and iPads can be found below.
6. After you have completed the steps outlined below for all devices, you can add your Clinipad.

Clearing Clinipad Data on Android

1. On your Android device, access the settings menu.
2. Then search for Apps or Application Manager.
   • This is commonly located in the general section of the menus.
3. Search and select Clinipad SOEI on the list of apps.
4. Find and select the option, Clear Data.
   • Sometimes this is within a sub-menu under Storage.
5. Exit the settings menu of your Android device.
6. Launch the Clinipad SOEI app.
7. You will be prompted to enter your EXACT server IP address.
8. Repeat this for any other tablets that may need to be reconfigured.

Clearing Clinipad data on iPad

1. On your iPad, access the settings menu.
2. Then scroll down to the bottom of the main list, you should find Clinipad SOEI, select this.
   • This is often located near the bottom of the list.
3. An area named IP Address should be available to the right of the screen.
4. Click into this and delete the IP Address so this is empty.
5. Exit the settings menu of your iPad.
6. Launch the Clinipad SOEI app.
7. You will be prompted to enter your EXACT server IP address.
8. Repeat this for any other tablets that may need to be reconfigured.